Gvrp Commands; Commands In This Chapter; Clear Gvrp Statistics - Dell Networking 7048 Reference Manual

GVRP Commands

GARP VLAN Registration Protocol (GVRP) is used to propagate VLAN
membership information throughout the network. GVRP is based on the
Generic Attribute Registration Protocol (GARP), which defines a method of
propagating a defined attribute (that is, VLAN membership) throughout the
network. GVRP allows both end stations and the networking device to issue
and revoke declarations relating to membership in VLANs. End stations that
participate in GVRP register VLAN membership using GARP Protocol Data
Unit (GPDU) messages. Networking devices that implement the GVRP
protocol and enable GVRP then process the GPDUs. The VLAN registration
is made in the context of the port that receives the GPDU. The networking
device propagates this VLAN membership on all of its other ports in the
active topology. Thus, the end station VLAN ID is propagated throughout the
network. GVRP is an application defined in the IEEE 802.1p standard that
allows for the control of 802.1Q VLANs.

Commands in this Chapter

This chapter explains the following commands:

clear gvrp statistics

garp timer
gvrp enable (global)
gvrp enable (interface)
gvrp registration-forbid
clear gvrp statistics
Use the clear gvrp statistics command in Privileged EXEC mode to clear all
the GVRP statistics information.
gvrp vlan-creation-forbid
show gvrp configuration
show gvrp error-statistics
show gvrp statistics
–
GVRP Commands
18
479