Dell Networking 7048 Reference Manual page 723

Table 33-1. RADIUS Attributes Supported by PowerConnect Switch Service
Type RADIUS Attribute Name
61 NAS-PORT-TYPE
64 TUNNEL-TYPE
65 TUNNEL-MEDIUM-TYPE
79 EAP-MESSAGE
80 MESSAGE-AUTHENTICATOR Set by
81 TUNNEL-PRIVATE-GROUP-ID Yes
The following attributes are processed in the RADIUS Access-Accept
message received from a RADIUS server:
• NAS-PORT
– ifIndex of the port to be authenticated
• REPLY-MESSAGE
– Trigger to respond to the Access-Accept message with an EAP
notification
• STATE
– RADIUS server state. Transmitted in Access-Request and Accounting-
Request messages.
• SESSION-TIMEOUT
– Session time-out value for the session (in seconds). Used by both
802.1x and Captive Portal.
• TERMINATION-ACTION
– Indication as to the action taken when the service is completed.
• EAP-MESSAGE
– Contains an EAP message to be sent to the user. This is typically used
for MAB clients.
• VENDOR-SPECIFIC
– No actions configured at this time.
802.1X User Manager Captive Portal
Yes No
Yes No
Yes No
Yes No
No
RADIUS
client for
Accounting
No
RADIUS Commands
No
No
No
No
No
No
723