Dell Networking 7048 Reference Manual page 101

Command
iscsi cos
iscsi enable
iscsi target port
show iscsi
show iscsi sessions
a. For the meaning of each Mode abbreviation, see
Link Dependency
Command
action
link-dependency group
add gigabitethernet
add tengigabitethernet
add port-channel
depends-on
show link-dependency
a. For the meaning of each Mode abbreviation, see
Description
Sets the quality of service profile that will be
applied to iSCSI flows.
Enables Global Configuration mode command
globally enables iSCSI awareness.
Configures an iSCSI target port (optionally
configures target port address and name).
Displays the iSCSI settings.
Displays the iSCSI sessions.
Mode Types
Description
Indicates if the link-dependency group should
mirror or invert the status of the depended on
interfaces.
Enters the link-dependency mode to configure
a link-dependency group.
Adds member gigabit Ethernet port(s) to the
dependency list.
Adds member ten gigabit Ethernet port(s) to
the dependency list.
Adds member port-channels to the
dependency list.
Adds the dependent Ethernet ports or port
channels list.
Shows the link dependencies configured on a
particular group.
Mode Types
on page 81.
on page 81.
Command Groups
a
Mode
GC
GC
GC
PE
PE
a
Mode
LD
GC
LD
LD
LD
LD
PE
101