Ip Igmp Snooping Report-Suppression - Dell Networking 7048 Reference Manual

Command Mode
Global Configuration mode
User Guidelines
The mcrexpiretime should be less than the group membership interval.
Example
The following example sets the multicast router present expiration time on
VLAN 2 to 60 seconds.
console(config)#ip igmp snooping vlan 2 mcrtexpiretime 1500

ip igmp snooping report-suppression

This command enables IBMP report suppression on a specific VLAN. The no
form of this command disables report suppression.
Syntax
vlan-id
ip igmp snooping vlan report-suppression
no ip igmp report-suppression
vlan id — Number assigned to the VLAN
•
Default Configuration
Report suppression is enabled by default.
Command Mode
Global Configuration mode
User Guidelines
When IGMP report suppression is enabled, the switch only sends the first
report received for a group in response to a query. Report suppression is only
applicable to IGMPv1 and IGMPv2.
499
IGMP Snooping Commands