Address Table - Dell Networking 7048 Reference Manual

Command
deny | permit (IP ACL)
ip access-group
mac access-group
mac access-list extended
mac access-list extended
rename
service-acl input
show service-acl interface
show ip access-lists
show mac access-list
a. For the meaning of each Mode abbreviation, see

Address Table

Command
clear mac address-table
mac address-table aging-
time
mac address-table multicast
forbidden address
Description
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
Attaches a specified access-control list to an
interface.
Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
Creates the MAC Access Control List (ACL)
name
identified by the
Renames the existing MAC Access Control List
(ACL) name.
Blocks Link Local Protocol Filtering (LLPF)
protocol(s) on a given port.
Displays the status of LLPF rules configured on
a particular port or on all the ports.
Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
Displays a MAC access list and all of the rules
that are defined for the ACL.
Mode
Description
Removes any learned entries from the
forwarding database.
Sets the address table aging time.
Forbids adding a specific multicast address to
specific ports.
parameter.
Typeson page 81.
Command Groups
a
Mode
ML
GC or
IC
GC or
IC
GC
GC
IC
PE
PE
PE
a
Mode
PE
GC
IC
85