Mac Address-Table Static Vlan - Dell Networking 7048 Reference Manual

Parameter
interface-list
Default Configuration
No forbidden addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
Before defining forbidden ports, ensure that the Multicast group is registered.
Examples
In this example the MAC address 0100.5e02.0203 is forbidden on port 2/0/9
within VLAN 8.
console(config)#mac address-table multicast forbidden
address vlan 8 0100.5e02.0203 add gigabitethernet
2/0/9

mac address-table static vlan

Use the mac address table static vlan command in Global Configuration
mode to add a static MAC-layer station source address to the bridge table. To
delete the MAC address, use the no form of the mac address table static
command.
Syntax
mac address-table static
{gigabitethernet|port-channel|tengigabitethernet}
no mac address table static
channel|tengigabitethernet}
Description
Specify a comma separated list of interfaces, a range of
interfaces, or a combination of both. Interfaces can be port-
channel numbers or physical ports in unit/slot/port format.
mac-addr
vlan
mac-addr
interface-id]
vlan-id
interface
interface-id
vlan-id
vlan {gigabitethernet|port-
Address Table Commands
311