Client-Name - Dell Networking 7048 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
DHCP Pool Configuration mode
User Guidelines
For Microsoft DHCP clients, the identifier consists of the media type
followed by the MAC address of the client. The media type 01 indicates
Ethernet media.
Use the show ip dhcp pool
parameters.
Example
console(config-dhcp-pool)#client-identifier 01:03:13:18:22:33:11
console(config-dhcp-pool)#host 192.168.21.34 32

client-name

Use the client-name command in DHCP Pool Configuration mode to specify
the host name of a DHCP client. Use the no form of the command to remove
the client name configuration.
Syntax
name
client-name
no client-name
Parameter Description
Parameter
name
Default Configuration
There is no default client name.
910
DHCP Server and Relay Agent Commands
command to display pool configuration
Description
The name of the DHCP client. The client name is specified as
up to 31 printable characters.