Show Vlan Association Subnet - Dell Networking 7048 Reference Manual

mac-address — Specifies the MAC address to be entered in the list.
•
(Range: Any valid MAC address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example shows no entry in MAC address to VLAN cross-
reference.
console#show vlan association mac
MAC Address
-----------------------
0001.0001.0001.0001
console#

show vlan association subnet

Use the show vlan association subnet command in Privileged EXEC mode to
display the VLAN associated with a specific configured IP-Address and
netmask. If no IP Address and net mask are specified, the VLAN associations
of all the configured IP-subnets are displayed.
Syntax
show vlan association subnet [
ip-address — Specifies IP address to be shown
•
ip-mask — Specifies IP mask to be shown
•
826
VLAN Commands
VLAN ID
-------
1
ip-address ip-mask
]