Match Class-Map - Dell Networking 7048 Reference Manual

console(config-policy-classmap)#mark ip-precedence 2
console(config-policy-classmap)#

match class-map

Use the match class-map command to add to the specified class definition
the set of match conditions defined for another class. Use the no form of this
command to remove from the specified class definition the set of match
conditions defined for another class.
Syntax
match class-map
no match class-map
refclassname — The name of an existing DiffServ class whose match
•
conditions are being referenced by the specified class definition.
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
• The parameters
• Only one other class may be referenced by a class.
• Any attempts to delete the
referenced by any
• The combined match criteria of
be an allowed combination based on the class type.
• Any subsequent changes to the
maintain this validity, or the change attempt fails.
refclassname
refclassname
refclassname and class-map-name can not be the same.
refclassname class while the class is still
class-map-name fails.
class-map-name and refclassname must
refclassname class match criteria must
QoS Commands
679