Timeout; Usage - Dell Networking 7048 Reference Manual

timeout

Use the timeout command in Radius mode to set the timeout value in
seconds for the designated Radius server.
Syntax
timeout
timeout
timeout — Timeout value in seconds for the specified server. (Range: 1-30
•
seconds.)
Default Configuration
The default value is 3 seconds.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example specifies the timeout setting for the designated
Radius Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20

usage

Use the usage command in Radius mode to specify the usage type of the
server.
Syntax
type
usage
type — Variable can be one of the following values: login , 802.1x or all .
•
750
RADIUS Commands