Show Ipv6 Dhcp Interface (Privileged Exec) - Dell Networking 7048 Reference Manual

DHCPv6 Inform Packets Received................. 0
DHCPv6 Relay-forward Packets Received.......... 0
DHCPv6 Relay-reply Packets Received............ 0
DHCPv6 Malformed Packets Received.............. 0
Received DHCPv6 Packets Discarded.............. 0
Total DHCPv6 Packets Received.................. 0
DHCPv6 Advertisement Packets Transmitted....... 0
DHCPv6 Reply Packets Transmitted............... 0
DHCPv6 Reconfig Packets Transmitted............ 0
DHCPv6 Relay-reply Packets Transmitted......... 0
DHCPv6 Relay-forward Packets Transmitted....... 0
Total DHCPv6 Packets Transmitted............... 0

show ipv6 dhcp interface (Privileged EXEC)

Use the show ipv6 dhcp interface command in Privileged EXEC mode to
display configuration and status information about an IPv6 DHCP interface
or all interfaces.
Syntax
show ipv6 dhcp interface [
Syntax Description
Parameter
interface-id
Default Configuration
This command has no default configuration.
946
DHCPv6 Commands
interface-id
Description
Any valid IP interface. See
interface representation.
]{statistics}
Interface Naming Conventions for