Dell Networking 7048 Reference Manual page 293

Parameter Description
Parameter
list-name
|
deny permit
every
eq
number
srcip
srcmask
dstip
dstmask
portvalue
portkey
log
time-range-name
queue-
assign-queue
id
interface
mirror
interface
redirect
Default Configuration
This command has no default configuration.
Description
Access-list name up to 31 characters in length.
Specifies whether the IP ACL rule permits or denies an action.
Allows all protocols.
Equal. Refers to the Layer 4 port number being used as match
criteria. The first reference is source match criteria, the second
is destination match criteria.
Standard protocol number. Protocol keywords
icmp,igmp,ip,tcp,udp.
Source IP address.
Source IP mask.
Destination IP address.
Destination IP mask.
The source layer 4 port match condition for the ACL rule is
specified by the port value parameter (Range: 0–65535).
Or you can specify the
following keywords: domain, echo, ftp, ftpdata, http, smtp,
snmp, telnet, tftp, and www.
Specifies that this rule is to be logged.
Displays the name of the time-range if the ACL rule has
referenced a time range.
Specifies the particular hardware queue for handling traffic that
matches the rule. (Range: 0-6)
Allows the traffic matching this rule to be copied to the
specified interface.
This parameter allows the traffic matching this rule to be
forwarded to the specified unit/slot/port.
portkey
, which can be one of the
ACL Commands
293