Denial Of Service - Dell Networking 7048 Reference Manual

Denial of Service

Command
dos-control firstfrag
dos-control icmp
dos-control l4port
dos-control sipdip
dos-control tcpflag
dos-control tcpfrag
ip icmp echo-reply
ip icmp error-interval
ip unreachables
ip redirects
ipv6 icmp error-interval
ipv6 unreachables
show dos-control
a. For the meaning of each Mode abbreviation, see
Line
Command
exec-timeout
Description
Enables Minimum TCP Header Size Denial of
Service protection.
Enables Maximum ICMP Packet Size Denial of
Service protections.
Enables L4 Port Denial of Service protection.
Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service protection.
Enables TCP Flag Denial of Service protections.
Enables TCP Fragment Denial of Service
protection.
Enables or disables the generation of ICMP Echo
Reply messages.
Limits the rate at which IPv4 ICMP error
messages are sent.
Enables the generation of ICMP Destination
Unreachable messages.
Enables the generation of ICMP Redirect
messages.
Limits the rate at which ICMPv6 error messages
are sent.
Enables the generation of ICMPv6 Destination
Unreachable messages.
Displays Denial of Service configuration
information.
Description
Configures the interval that the system waits for
user input.
Mode Types on page 81.
Command Groups
a
Mode
GC
GC
GC
GC
GC
GC
GC
GC
IC
IC
GC
IC
PE
a
Mode
LC
151