Random-Detect Queue-Parms - Dell Networking 7048 Reference Manual

Parameter
in
out
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this
command is successfully executed.
The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new ingress DiffServ policy
named "DELL."
console(config)#policy-map DELL in
console(config-policy-classmap)#

random-detect queue-parms

Use the random-detect queue-parms command to configure the WRED
green, yellow and red TCP and non-TCP packet minimum and maximum
thresholds and corresponding drop probabilities on an interface or all
interfaces.
Description
The policy is applied on ingress. Must be specified to create
new DiffServ policies. An existing policy can be selected
without specifying "in" or "out".
The policy is applied on egress. Either "in" or "out" must be
specified to create a new DiffServ policy. An existing policy may
be selected without the "in" or "out" parameter.
QoS Commands
697