Ip Igmp Query-Max-Response-Time; Ip Igmp Robustness - Dell Networking 7048 Reference Manual

ip igmp query-max-response-time

Use the ip igmp query-max-response-time command in Internet
Configuration mode to configure the maximum response time interval for
the specified interface. It is the maximum query response time advertised in
IGMPv2 queries on this interface. The time interval is specified in seconds.
Syntax
seconds
ip igmp query-max-response-time
no ip igmp query-max-response-time
seconds — Maximum response time. (Range: 0-25 seconds)
•
Default Configuration
The default maximum response time value is 10 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a maximum response time interval of one
second for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-max-response-time 10

ip igmp robustness

Use the ip igmp robustness command in Interface Configuration mode to
configure the robustness that allows tuning of the interface, that is, tuning for
the expected packet loss on a subnet. If a subnet is expected to have
significant loss, the robustness variable may be increased for the interface.
970
IGMP Commands