Dell Networking 7048 Reference Manual page 95

Command
show green-mode interface-
id
show green-mode
show green-mode eee-lpi-
history interface
a. For the meaning of each Mode abbreviation, see
GVRP
Command
clear gvrp statistics
garp timer
gvrp enable (global)
gvrp enable (interface)
gvrp registration-forbid
gvrp vlan-creation-forbid
show gvrp configuration
show gvrp error-statistics
show gvrp statistics
a. For the meaning of each Mode abbreviation, see
Description
Displays the green-mode configuration and
operational status of the port. This command is
also used to display the per port configuration
and operational status of the green-mode. The
status is shown only for the modes supported on
the corresponding hardware platform whether
enabled or disabled.
Displays the green-mode configuration for the
whole system. The status is shown only for the
modes supported on the corresponding
hardware platform whether enabled or disabled.
Displays the interface green-mode EEE LPI
history.
Mode Types
Description
Clears all the GVRP statistics information.
Adjusts the GARP application join, leave, and
leaveall GARP timer values.
Enables GVRP globally.
Enables GVRP on an interface.
De-registers all VLANs, and prevents dynamic
VLAN registration on the port.
Enables or disables dynamic VLAN creation.
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
Displays GVRP error statistics.
Displays GVRP statistics.
Mode Types
on page 81.
on page 81.
Command Groups
a
Mode
PE
PE
PE
a
Mode
PE
IC
GC
IC
IC
IC
PE
UE
UE
95