Dell Networking 7048 Reference Manual page 125

Command
ip helper-address (interface
configuration)
ip helper enable
show ip helper-address
show ip dhcp relay
show ip helper statistics
a. For the meaning of each Mode abbreviation, see
IP Routing
Command
encapsulation
ip address
ip mtu
ip netdirbcast
ip route
ip route default
ip route distance
ip routing
show ip brief
show ip interface
Description
Configures the relay of certain UDP broadcast
packets received on a specific interface.
Enables relay of UDP packets.
Displays the IP helper address configuration.
Displays the BootP/DHCP Relay information.
Displays the number of DHCP and other UDP
packets processed and relayed by the UDP relay
agent.
Mode Types
Description
Configures the link layer encapsulation type for
the packet.
Configures an IP address on an interface.
Sets the IP Maximum Transmission Unit
(MTU) on a routing interface.
nables the forwarding of network-directed
E
broadcasts.
Configures a static route. Use the no form of
the command to delete the static route.
Configures the default route. Use the no form
of the command to delete the default route.
Sets the default distance (preference) for static
routes.
Globally enables IPv4 routing on the router.
Displays all the summary information of the IP. PE
Displays all pertinent information about the IP
interface.
on page 81.
Command Groups
a
Mode
IC
GC
PE
UE or
PE
PE
a
Mode
IC
IC
IC
IC
GC
GC
GC
GC
PE
125