Lldp Med Confignotification - Dell Networking 7048 Reference Manual

Command Mode
Interface (Ethernet) Configuration
Default Value
LLDP-MED is disabled on all supported interfaces.
Usage Guidelines
No specific guidelines.
Example
console(config)#interface gigabitethernet 1/0/1
console(config-if-1/0/1)#lldp med

lldp med confignotification

This command is used to enable sending the topology change notification.
Syntax Description
lldp med confignotification
no lldp med confignotification
Parameter Ranges
Not applicable
Command Mode
Interface (Ethernet) Configuration
Default Value
By default, notifications are disabled on all supported interfaces.
Usage Guidelines
No specific guidelines.
593
LLDP Commands