Show Classofservice Ip-Dscp-Mapping - Dell Networking 7048 Reference Manual

-------------
0
1
2
3
4
5
6
7
The following table lists the parameters in the example and gives a
description of each.
Parameter
User Priority
Traffic Class

show classofservice ip-dscp-mapping

Use the show classofservice ip-dscp-mapping command in Privileged EXEC
mode to display the current IP DSCP mapping to internal traffic classes for a
specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
---------------
1
1
6
4
3
4
5
6
Description
The 802.1p user priority value.
The traffic class internal queue identifier to which
the user priority value is mapped.
QoS Commands
705