Dell Networking 7048 Reference Manual page 158

Command
debug ping
debug rip
debug sflow
debug spanning-tree
debug vrrp
show debugging
a. For the meaning of each Mode abbreviation, see
sFlow
Command
sflow destination
sflow polling
sflow polling (Interface
Mode)
sflow sampling
sflow sampling (Interface
Mode)
show sflow agent
show sflow destination
show sflow polling
show sflow sampling
a. For the meaning of each Mode abbreviation, see
Description
Enables tracing of ICMP echo requests and
responses.
Enables tracing of RIP requests and responses.
Enables sFlow debug packet trace.
Traces spanning tree BPDU packet reception
and transmission.
Enables VRRP debug protocol messages.
Displays packet tracing configurations.
Mode Types
Description
Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Displays the sflow agent information.
Displays all the configuration information
related to the sFlow receivers.
Displays the sFlow polling instances created on
the switch.
Displays the sFlow sampling instances created
on the switch.
Mode Types
on page 81.
on page 81.
Command Groups
a
Mode
PE
PE
PE
PE
PE
PE
a
Mode
GC
GC
IC
GC
IC
PE
PE
PE
PE
158