Ip Igmp-Proxy Reset-Status - Dell Networking 7048 Reference Manual

Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the IGMP Proxy on the VLAN 15 router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy

ip igmp-proxy reset-status

Use the ip igmp-proxy reset-status command in Interface Configuration
mode to reset the host interface status parameters of the IGMP Proxy router.
This command is valid only when IGMP Proxy is enabled on the interface.
Syntax
ip igmp-proxy reset-status
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
982
IGMP Proxy Commands