Dell Networking 7048 Reference Manual page 98

Command
ip name-server
ipv6 address (Interface
Config)
ipv6 address (OOB Port)
ipv6 address dhcp
ipv6 enable (Interface
Config)
ipv6 enable (OOB Config)
ipv6 gateway (OOB Config)
show hosts
show ip address-conflict
show ip helper-address
show ipv6 dhcp interface
out-of-band statistics
show ipv6 interface out-of-
band
a. For the meaning of each Mode abbreviation, see
IPv6 ACL
Command
deny | permit (IPv6
ACL)
ipv6 access-list
ipv6 access-list rename
Description
Configures available name servers.
Sets the IPv6 address of the management
interface.
Sets the IPv6 prefix on the out-of-band port.
Enables the DHCPv6 client on an IPv6
interface.
Enables IPv6 on the management interface.
Enables IPv6 operation on the out-of-band
interface.
Configures the address of the IPv6 gateway.
Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
Displays the status information corresponding
to the last detected address conflict.
Displays the ip helper addresses configuration.
Displays IPv6 DHCP statistics for the out-of-
band interface.
Displays the IPv6 out-of-band port
configuration.
Mode Types
Description
Creates a new rule for the current IPv6 access
list.
Creates an IPv6 Access Control List (ACL)
consisting of classification fields defined for the
IP header of an IPv6 frame.
Changes the name of an IPv6 ACL.
on page 81.
Command Groups
a
Mode
GC
IC
IC
IC
GC
IC
IC
UE
UE or
PE
PE
PE
PE
a
Mode
v6ACL
GC
GC
98