Dell Networking 7048 Reference Manual page 266

no password
password — Password for this level. (Range: 8- 64 characters)
•
• encrypted — Encrypted password to be entered, copied from another
switch configuration.
Default Configuration
No password is specified.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies a password "mcmxxyyy" on a line.
console(config-line)# password mcmxxyyy
password
Use the password command in User EXEC mode to allow a currently logged
in user to change the password for only that user without having read/write
privileges. This command should be used after the password has aged. The
user is prompted to enter the old password and the new password.
NOTE:
For commands that configure password properties, see
Management
Syntax
password
Parameter Description
This command does not require a parameter description.
266
AAA Commands
(User EXEC)
Commands.
Password