Show Ports Security - Dell Networking 7048 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
console#show mac address-table vlan 1
Mac Address Table
-------------------------------------
Vlan Mac Address
---- --------------- ------- -------
1 0000.0001.0000
1 0000.8420.5010
1 0000.E26D.2C2A
1 0000.E89A.596E
1 0001.02F1.0B33
Total Mac Addresses for this criterion: 5

show ports security

Use the show ports security command in Privileged EXEC mode to display
the port-lock status.
Type Ports
Dynamic gi1/0/1
Dynamic gi1/0/1
Dynamic gi1/0/1
Dynamic gi1/0/1
Dynamic gi1/0/1
Address Table Commands
323