Dell Networking 7048 Reference Manual page 113

Command
show tacacs
tacacs-server host
tacacs-server key
tacacs-server timeout
timeout
a. For the meaning of each Mode abbreviation, see
VLAN
Command
dvlan-tunnel ethertype
interface vlan
interface range vlan
mode dvlan-tunnel
name (VLAN
Configuration)
private-vlan
protocol group
protocol vlan group
protocol vlan group all
show dvlan-tunnel
Description
Displays TACACS+ server settings and
statistics.
Specifies a TACACS+ server host.
Sets the authentication and encryption key for
all TACACS+ communications between the
switch and the TACACS+ daemon.
Sets the interval for which the switch waits for a
server host to reply.
Specifies the timeout value in seconds.
Mode Types
Description
Configures the EtherType for the interface.
Enters the VLAN interface configuration mode. GC
Enters the interface configuration mode to
configure multiple VLANs.
Enables Double VLAN tunneling on the
specified interface.
Configures a name to a VLAN.
Defines a private VLAN association between
the primary and secondary VLANs.
vlanid
Attaches a to the protocol-based VLAN
groupid
identified by
Adds the physical unit/slot/port interface to the
protocol-based VLAN identified by
Adds all physical unit/slot/port interfaces to the
protocol-based VLAN identified by
Displays all interfaces enabled for Double
VLAN Tunneling.
on page 81.
.
groupid
groupid
Command Groups
a
Mode
PE
GC
GC
GC
TC
a
Mode
GC
GC
IC
IC
VC
VC
IC
.
GC
.
PE
113