Show Lldp Interface - Dell Networking 7048 Reference Manual

console#show lldp
LLDP transmit and receive disabled on all interfaces

show lldp interface

Use the show lldp interface command in Privileged EXEC mode to display
the current LLDP interface state.
Syntax
show lldp interface {gigabitethernet unit/slot/port | tengigabitethernet |
all}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
This example show how the information is displayed when you use the
command with the all parameter.
console#show lldp interface all
Interface Link Transmit Receive
--------- ---- -------- -------- -------- ------- ----
1/0/1
1/0/2
1/0/3
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 –
System Capability
602
LLDP Commands
Up Enabled
Down Enabled
Down Disabled Disabled Disabled 1,2
Notify
Enabled Enabled
Enabled Disabled
TLVs Mgmt
0,1,2,3 Y
Y
N