Dell Networking 7048 Reference Manual page 431

Parameter Description
Parameter
unit/slot/port
switchport
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following example shows statistics for port 1/0/1.
console(config-if-Te1/0/1)#show statistics te1/0/1
Total Packets Received (Octets)................ 0
Packets Received 64 Octets..................... 0
Packets Received 65-127 Octets................. 0
Packets Received 128-255 Octets................ 0
Packets Received 256-511 Octets................ 0
Packets Received 512-1023 Octets............... 0
Packets Received 1024-1518 Octets.............. 0
Packets Received > 1518 Octets................. 0
Packets RX and TX 64 Octets.................... 0
Packets RX and TX 65-127 Octets................ 0
Packets RX and TX 128-255 Octets............... 0
Packets RX and TX 256-511 Octets............... 0
Description
A valid interface. See
interface representation.
Displays statistics for the entire switch.
Interface Naming Conventions
Ethernet Configuration Commands
for
431