Show Ipv6 Dhcp; Show Ipv6 Dhcp Binding - Dell Networking 7048 Reference Manual

show ipv6 dhcp

Use the show ipv6 dhcp command in Privileged EXEC mode to display the
DHCPv6 server name and status.
Syntax
show ipv6 dhcp
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
The DUID value of the server will only appear in the output when a DHCPv6
lease is active.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled
Server DUID:

show ipv6 dhcp binding

Use the show ipv6 dhcp binding command in Privileged EXEC mode to
display the configured DHCP pool.
Syntax
ipv6-address
show ipv6 dhcp binding [ ]
943
DHCPv6 Commands