Dell Networking 7048 Reference Manual page 878

Parameter Description
Parameter
interface–id
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed by this command.
Field
Clients
Authenticated using
Monitor Mode
Clients
Authenticated using
Dot1x
The following table describes the significant fields shown in the display.
Field
Interface
Username
Supp MAC Address
Session Time
878
802.1x Commands
Description
Any valid interface. See
interface representation.
Description
Indicates the number of Dot1x clients authenticated using
Monitor mode.
Indicates the number of Dot1x clients authenticated using
802.1x authentication process.
Description
The port number.
The username representing the identity of the Supplicant.
This field shows the username when the port control is
auto or mac-based. If the port is Authorized, it shows the
username of the current user. If the port is unauthorized it
shows the last user that was authenticated successfully.
The MAC-address of the supplicant
The amount of time, in seconds, since the client was
authenticated on the port.
Interface Naming Conventions for