Layer 3 Commands - Dell Networking 7048 Reference Manual

Layer 3 Commands

ARP (IPv4)
Command
arp
arp cachesize
arp dynamicrenew
arp purge
arp resptime
arp retries
arp timeout
clear arp-cache
clear arp-cache management
ip local-proxy-arp
ip proxy-arp
show arp
show arp brief
a. For the meaning of each Mode abbreviation, see
Description
Creates an Address Resolution Protocol (ARP)
entry.
Configures the maximum number of entries in
the ARP cache.
Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
Causes the specified IP address to be removed
from the ARP cache.
Configures the ARP request response timeout.
Configures the ARP count of maximum request
for retries.
Configures the ARP entry age-out time.
Removes all ARP entries of type dynamic from
the ARP cache.
Removes all entries from the ARP cache learned
from the management port.
Enables proxying of ARP requests.
Enables proxy ARP on a router interface.
Displays the Address Resolution Protocol (ARP)
cache.
Displays the brief Address Resolution Protocol
(ARP) table information.
Mode Types on page 81.
Command Groups
a
Mode
GC
GC
GC
PE
GC
GC
GC
PE
PE
IC
IC
PE
PE
118