Ipv6 Routing - Dell Networking 7048 Reference Manual

Command
show ip protocols
show ip route
show ip route preferences
show ip route summary
show ip traffic
show ip vlan
show routing heap summary
a. For the meaning of each Mode abbreviation, see

IPv6 Routing

Command
clear ipv6 neighbors
clear ipv6 statistics
ipv6 address
ipv6 enable
ipv6 hop-limit
ipv6 host
Description
Displays the parameters and current state of the
active routing protocols.
Displays the routing table.
Displays detailed information about the route
preferences.
Shows the number of all routes, including best
and non-best routes.
Displays IP statistical information.
Displays the VLAN routing information for all
VLANs with routing enabled.
Displays a summary of the memory
allocation from the routing heap.
Mode Types
Description
Clears all entries in the IPv6 neighbor table
or an entry on a specific interface.
Clears IPv6 statistics for all interfaces or for a
specific interface, including loopback and
tunnel interfaces.
Configures an IPv6 address on an interface
(including tunnel and loopback interfaces).
Enables IPv6 routing on an interface
(including tunnel and loopback interfaces)
that has not been configured with an explicit
IPv6 address.
Configures the hop limit used in IPv6 PDUs
originated by the router.
Defines static host name-to- ipv6 address
mapping in the host cache.
on page 81.
Mode
PE
PE
IC
IC
GC
GC
Command Groups
a
Mode
PE
PE
PE
PE
UE or
PE
PE
PE
a
126