System Management - Dell Networking 7048 Reference Manual

System Management

Command
asset-tag
banner exec
banner login
banner motd
banner motd
acknowledge
clear checkpoint
statistics
clear counters stack-
ports
cut-through mode
exec-banner
hostname
initiate failover
locate
login-banner
media-type
member
motd-banner
nsf
ping
reload
Description
Specifies the switch asset-tag.
Sets the message that is displayed after a
successful login.
Sets the message that is displayed just before
the login prompt.
Specifies message-of-the-day banner.
Acknowledges message-of-the-day banner.
Clears the statistics for the checkpointing
process.
Clears the statistics for all stack-ports.
Enables the cut-through mode on the switch.
Enables exec banner on the console, telnet or
SSH connection.
Specifies or modifies the switch host name.
Forces failover of management unit.
Locates a switch by LED blinking.
Enables login banner on the console, telnet, or
SSH connection.
Selects the media-type for the interface. This
command only valid on combo ports.
Configures the switch.
Enables motd on the console, telnet, or SSH
connection.
Specifies non-stop forwarding.
Sends ICMP echo request packets to another
node on the network.
Reloads the operating system.
Mode
GC
GC
GC
GC
GC
GC
PE
GC
LC
GC
GC
PE
LC
IC
SG
LC
GC
UE
PE
Command Groups
a
162