Download Print this page

Mac Address-Table Multicast Forbidden Address - Dell Networking 7048 Reference Manual

Powerconnect 7000 series systems
Hide thumbs Also See for Networking 7048:

Advertisement

Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
In this example the MAC Address Table aging time is set to 400.
console(config)#mac address-table aging-time 400

mac address-table multicast forbidden address

Use the mac address-table multicast forbidden address command in Global
Configuration mode to forbid adding a specific Multicast address to specific
ports. To return to the system default, use the no form of this command. If
routers exist on the VLAN, do not change the unregistered multicast
addresses state to
Syntax
mac address-table multicast forbidden address vlan
address
ip-multicast-address
|
port-channel | tengigabitethernet }
no mac address-table multicast forbidden address vlan
multicast-address
Parameter Description
Parameter
add
remove
vlan vlan-id
mac-multicast-
address
ip-multicast-address
310
Address Table Commands
drop
on the routers ports.
} {add | remove} interface {gigabitethernet |
ip-multicast-address
|
Description
Adds ports to the group. If no option is specified, this is the
default option.
Removes ports from the group.
A valid vlan-id. (Range 1-4093)
MAC Multicast address
IP Multicast address.
vlan-id
interface-list
}
in the format xxxx.xxxx.xxxx.
mac-multicast-
{
vlan-id
mac-
{

Hide quick links:

Advertisement

loading