Dell Networking 7048 Reference Manual page 79

Table 1-1. System Command Groups
Command Group
Radius
Spanning Tree
TACACS+
VLAN
Voice VLAN
802.1x
Layer 3 Commands
ARP (IPv4)
DHCP Server and Relay
Agent (IPv4)
DHCPv6
DVMRP (Mcast)
IGMP (Mcast)
IGMP Proxy (Mcast)
IP Helper/DHCP Relay
IP Routing (IPv4)
IPv6 Multicast
IPv6 Routing
Loopback Interface
(IPv6)
Multicast (Mcast)
OSPF (IPv4)
OSPFv3 (IPv6)
Router Discovery Protocol
(IPv4)
Routing Information
Protocol (IPv4)
(continued)
Description
Configures and displays RADIUS information.
Configures and reports on Spanning Tree protocol.
Configures and displays TACACS+ information.
Configures VLANs and displays VLAN information.
Configures voice VLANs and displays voice VLAN
information.
Configures and displays commands related to 802.1x
security protocol.
Manages Address Resolution Protocol functions.
Manages DHCP/BOOTP operations on the system.
Configures IPv6 DHCP functions.
Configures DVMRP operations.
Configures IGMP operations.
Manages IGMP Proxy on the system.
Configures relay of UDP packets.
Configures IP routing and addressing.
Manages IPv6 Multicasting on the system.
Configures IPv6 routing and addressing.
Manages Loopback configurations.
Manages Multicasting on the system.
Manages shortest path operations.
Manages IPv6 shortest path operations.
Manages router discovery operations.
Configures RIP activities.
Command Groups
79