Clear Arp-Cache - Dell Networking 7048 Reference Manual

Default Configuration
The default value is 1200 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines 900 seconds as the timeout.
console(config)#arp timeout 900

clear arp-cache

Use the clear arp-cache command in Privileged EXEC mode to remove all
ARP entries of type dynamic from the ARP cache.
Syntax
clear arp-cache [gateway]
gateway — Removes the dynamic entries of type gateway, as well.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example clears all entries ARP of type dynamic, including
gateway, from ARP cache.
898
ARP Commands