Netbios-Node-Type - Dell Networking 7048 Reference Manual

netbios-node-type

Use the netbios-node-type command in DHCP Pool Configuration mode to
set the NetBIOS node type for a Microsoft DHCP client. Use the no form of
the command to remove the netbios node configuration.
Syntax
netbios-node-type
no netbios-node-type
Parameter Description
Parameter
type
Default Configuration
There is no default NetBIOS node type configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool
parameters. The NetBIOS node type information is conveyed in the Option
46 TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and
DHCP BOOTREPLY messages. Supported NetBIOS node types are:
• broadcast (b-node)
• peer-to-peer (p-node)
• mixed (m-node)
• hybrid (h-node)
Example
console(config-dhcp-pool)#netbios-node-type h-node
type
Description
The NetBIOS node type can be b-node, h-node, m-node or p-
node.
command to display pool configuration
DHCP Server and Relay Agent Commands
921