Parameter
private-vlan
mapping
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Interface Config mode and all Config sub-modes
User Guidelines
Do not configure private VLANs on ports configured with any of these
features:
•
Link Aggregation Control Protocol (LACP)
•
Multicast VLAN Registration (MVR)
•
Voice VLAN
It is recommended that the private VLAN host ports be configured as
spanning-tree portfast.
Examples
The following example displays switchport configuration individually for
gi1/0/1.
console#show interface switchport gigabitethernet
1/0/1
Port 1/0/1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled
820
VLAN Commands
Description
Displays VLAN mapping for the private-VLAN promiscuous
ports.