Bootfile - Dell Networking 7048 Reference Manual

console(config-dhcp-pool)#netbios-name-server 192.168.22.2
192.168.23.2
console(config-dhcp-pool)#netbios-node-type h-node
console(config-dhcp-pool)#lease 2 12
console(config-dhcp-pool)#default-router 192.168.22.1 192.168.23.1

bootfile

Use the bootfile command in DHCP Pool Configuration mode to set the
name of the image for the DHCP client to load. Use the no form of the
command to remove the bootfile configuration. Use the
command to display pool configuration parameters.
Syntax
filename
bootfile
no bootfile
Parameter Description
Parameter
filename
Default Configuration
There is no default bootfile filename.
Command Mode
DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-dhcp-pool)#bootfile ntldr
Description
The name of the file for the DHCP client to load.
DHCP Server and Relay Agent Commands
show ip dhcp pool
907