Match Srcip; Match Srcip6 - Dell Networking 7048 Reference Manual

console(config-classmap)# match source-address mac
10:10:10:10:10:10 11:11:11:11:11:11

match srcip

Use the match srcip command in Class-Map Configuration mode to add to
the specified class definition a match condition based on the source IP
address of a packet.
Syntax
ipaddr ipmask
match srcip
ipaddr — Specifies a valid IP address.
•
ipmask — Specifies a valid IP address bit mask. Note that although this IP
•
address bit mask is similar to a subnet mask, it does not need to be
contiguous.
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
Only one srcip matching criteria can be specified. To remove the matching
criteria, delete the class map.
Example
The following example displays adding a match condition for the specified IP
address and address bit mask.
console(config-classmap)#match srcip 10.240.1.1
10.240.0.0

match srcip6

The match srcip6 command adds to the specified class definition a match
condition based on the source IPv6 address of a packet.
690
QoS Commands