Commands In This Chapter - Dell Networking 7048 Reference Manual

Accounting Method Lists
An Accounting Method List (AML) is an ordered list of accounting methods
that can be applied to the accounting types (exec or commands). Accounting
Method Lists are identified by the default keyword or by a user-defined name.
TACACS+ and RADIUS are supported as accounting methods.
TACACS+ accounts all accounting types. RADIUS only accounts exec
sessions.
Access Line Modes
AMLs can be applied to the following access line modes for accounting
purposes:
• Console: This mode is used when user logs in to the switch using serial
console.
• Telnet: This mode is used when user logs in through Telnet.
• SSH: This mode is used when user logs in through SSH.
By default, no accounting is enabled for any line config modes.
The following default Accounting Methods List are available.
Default List Name
Default Exec List
Default Command List
The default lists are not applied to any line-configuration modes by default.

Commands in this Chapter

This chapter explains the following commands:
aaa authentication dot1x
default
aaa authentication enable
aaa authentication login
Accounting Type Record Type
exec
commands
clear (IAS)
enable authentication
enable password
Accounting Method
Start-stop TACACS+
Stop-only TACACS+
password (Line
Configuration)
password (User EXEC)
show aaa ias-users
AAA Commands
247