Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example removes the specified IP address from arp cache.
console#arp purge 192.168.1.10
arp resptime
Use the arp resptime command in Global Configuration mode to configure
the ARP request response time-out. To return the response time-out to the
default value, use the no form of this command.
Syntax
integer
arp resptime
no arp resptime
integer — IP ARP entry response time out. (Range: 1-10 seconds)
•
Default Configuration
The default value is 1 second.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a response time-out of 5 seconds.
console(config)#arp resptime 5
896
ARP Commands