Port - Dell Networking 7048 Reference Manual

show tacacs
key
Use the key command in TACACS Configuration mode to specify the
authentication and encryption key for all TACACS communications between
the device and the TACACS server. This key must match the key used on the
TACACS daemon.
Syntax
key [key-string]
• key-string
Default Configuration
If left unspecified, the key-string parameter defaults to the global value.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies an encryption and authentication key of 12.
console(tacacs)#key 12

port

Use the port command in TACACS Configuration mode to specify a server
port number.
Syntax
port [port-number]
port-number — The server port number. If left unspecified, the default
•
port number is 49. (Range: 0 – 65535)
786
TACACS+ Commands
— To specify the key name. (Range: 1 – 128 characters)
timeout