Dell Networking 7048 Reference Manual page 476

Parameter Description
Parameter
interface-id
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
On combo ports, samples are only collected on the copper ports when
enabled.
The following fields are displayed by this command.
Term
Sampling Interval
Total No. of
Samples to Keep
Percentage LPI
Time per Stack
Sample No.
Sample Time
%Time Spent in LPI
Mode Since Last
Sample
%Time Spent in LPI
Mode Since Last
Reset
476
Green Ethernet Commands
Description
Any valid interface. See
interface representation.
Description
Interval at which EEE LPI statistics is collected.
Maximum number of samples to keep.
Percentage of total time spent in LPI mode by all ports in the
stack when compared to total time since reset.
Sample index.
Time since last reset.
Percentage of time spent in LPI mode on this port when
compared to sampling interval.
Percentage of total time spent in LPI mode on this port when
compared to time since reset.
Interface Naming Conventions for