Show Dhcp L2Relay Remote-Id Vlan - Dell Networking 7048 Reference Manual

show dhcp l2relay remote-id vlan

Use the show dhcp l2relay remote-id vlan command in Privileged EXEC
mode to display whether DHCP L2 Relay is globally enabled and shows the
remote ID configured on the specified VLAN or VLAN range.
Syntax
show dhcp l2relay remote-id vlan
Parameter Description
Parameter
vlan-range
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show dhcp l2relay remote-id vlan 200
DHCP L2 Relay is Enabled.
VLAN ID Remote Id
---------------------
200remote_22
vlan-range
Description
Show information for the specified VLAN range. A range may
be a single VLAN ID or two VLAN IDs separated by a single
dash with no embedded spaces.
DHCP Layer 2 Relay Commands
357