Port Security - Dell Networking 7048 Reference Manual

Syntax Description
Parameter
mac-address
vlan-id
interface-id
Default Configuration
No static addresses are defined. The default mode for an added address is
permanent.
Command Mode
Global Configuration mode
User Guidelines
The MAC address may be a unicast or multicast MAC address. Static MAC
addresses are never overridden by dynamically learned addresses. This has
implications for protocols like IGMP snooping, where statically configuring
the MAC address of a multicast router keeps IGMP snooping from
dynamically adding the multicast router to a different port.
Example
The following example adds a permanent static MAC-layer station source
address c2f3.220a.12f4 to the MAC address table.
console(config)# mac address-table static
c2f3.220a.12f4 vlan 4 interface gigabitethernet6/0/1

port security

Use the port security command in Interface Configuration mode to disable
the learning of new addresses on an interface. To enable new address learning,
use the no form of the port security command.
312
Address Table Commands
Description
A valid MAC address in the format xxxx.xxxx.xxxx or
xx:xx:xx:xx:xx:xx
Valid VLAN ID (1-4093)
The interface to which the received packet is forwarded.