Telnet Server - Dell Networking 7048 Reference Manual

Command
show system power
show system
temperature
show tech-support
show users
show version
stack
stack-port
standby
switch renumber
telnet
traceroute
a. For the meaning of each Mode abbreviation, see

Telnet Server

Command
ip telnet server disable
ip telnet port
show ip telnet
Description
Displays information about the system level
power consumption.
Displays information about the system
temperature and fan status.
Displays system and configuration information
(for debugging/calls to technical support).
Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
Displays the system version information.
Sets the mode to Stack Global Configuration
mode.
Sets the mode to Stack Global Configuration
mode to configure Stack ports as either
Stacking ports or as Ethernet ports.
Configures the standby in the stack.
Changes the identifier for a switch in the stack. GC
Logs into a host that supports Telnet.
Discovers the IP routes that packets actually
take when travelling to their destinations.
Description
Enables/disables the Telnet service on the
switch.
Configures the Telnet TCP port number on the
switch.
Displays the status of the Telnet server and the
Telnet TCP port number.
Mode Types on page 81.
Command Groups
a
Mode
UE or PE
UE or PE
PE
PE
UE
GC
GC
SG
PE
PE
a
Mode
GC
GC
PE
164