Cos-Queue Min-Bandwidth - Dell Networking 7048 Reference Manual

console(config)#policy-map color in
console(config-policy-map)#class class-ipv4
console(config-policy-classmap)#police-simple 1000 16
conform-action transmit violate-action transmit
console(config-policy-classmap)#conform-color class-
cos1
console(config-policy-classmap)#exit
console(config-policy-map)#exit
console(config)#

cos-queue min-bandwidth

Use the cos-queue min-bandwidth command in either Global Configuration
mode or Interface Configuration mode to specify the minimum transmission
bandwidth for each interface queue. To restore the default for each queue's
minimum bandwidth value, use the no form of this command.
Syntax
cos-queue min-bandwidth
no cos-queue min-bandwidth
bw-0 — Specifies the minimum transmission bandwidth guarantee for an
•
interface. You must specify as many bandwidth parameters as there are
COS queues (bw-0 through bw-n). (Range: 0–100 in increments of 5)
Default Configuration
By default, all CoS queues are configured with a 0% minimum bandwidth
guarantee.
Command Mode
Global Configuration mode or Interface Configuration (gigabitethernet,
port-channel, tengigabitethernet) mode
bw-0 bw-1 bw-n
...
QoS Commands
671