Dell Networking 7048 Reference Manual page 924

Parameter Description
Parameter
code
ascii string1
hex string1
ip-address1
Default Configuration
There is no default option configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
The option information must match the selected option type and length.
Options cannot be longer than 255 characters in length. The option
information is conveyed in the TLV specified by the code parameter in the
DHCP OFFER, DHCP ACK, DHCP INFORM ACK and DHCP
BOOTREPLY messages.
Figure 42-1 lists the options that can be configured and their fixed length,
minimum length, and length multiple requirements.
Figure 42-1. Option Codes and Lengths
Option Code
2 (Time Offset)
4 (Time Server)
7 (Log Server)
8 (Cookie Server)
9 (LPR Server)
924
DHCP Server and Relay Agent Commands
Description
The DHCP TLV option code.
An ASCII character string. Strings with embedded blanks must
be wholly contained in quotes.
A hexadecimal string containing the characters [0-9A-F]. The
string should not begin with 0x. A hex string consists of two
characters which are parsed to fill a single byte. Multiple values
are separated by blanks.
An IPv4 address in dotted decimal notation.
Fixed Length
4
–
–
–
–
Minimum Length Multiple Of
– –
4 4
4 4
4 4
4 4