Show Ipv6 Mld Snooping Querier - Dell Networking 7048 Reference Manual

ipv6 mld snooping querier timer expiry
timer — The time that the switch remains in Non-Querier mode after it
•
has discovered that there is a multicast querier in the network. (Range:
60–300 seconds)
Default Configuration
The default timer expiration period is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier timer expiry 222

show ipv6 mld snooping querier

Use the show ipv6 mld snooping querier command to display MLD
Snooping Querier information. Configured information is displayed whether
or not MLD Snooping Querier is enabled.
Syntax
show ipv6 mld snooping querier [detail | vlan
vlan-id — A valid VLAN ID. (Range: 1 - 4093)
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
560
IPv6 MLD Snooping Querier Commands
vlan-id
]