Client-Identifier - Dell Networking 7048 Reference Manual

Parameter Description
Parameter
*
ip-address
Default Configuration
The command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#clear ip dhcp conflict *

client-identifier

Use the client-identifier command in DHCP Pool Configuration mode to
identify a Microsoft DHCP client to be manually assigned an address. Use the
no form of the command to remove the client identifier configuration.
Syntax
client-identifier
no client-identifier
Parameter Description
Parameter
unique-identifier
Description
Clear all dhcp conflicts.
Clear a specific address conflict.
unique-identifier
Description
The identifier of the Microsoft DHCP client. The client
identifier is specified as 7 bytes of the form
XX:XX:XX:XX:XX:XX:XX where X is a hexadecimal digit.
DHCP Server and Relay Agent Commands
909